13
Factory Settings on Delivery Internet Functions
■ The door opener can be acti-
vated from all terminals. Door-
way calls can be forwarded.
■ Keypad dialling can be used.
■ Call diversion for SMS calls in the
wired network is not activated.
■ The evaluation of connection
data by external cost-recording
programs is deactivated.
■ The cost multiplier is set to
100%, i.e. the costs are not mul-
tiplied by any factor.
■ Every user can change the con-
figuration of the OpenCom 100.
■ Every user can create a personal
telephone book and edit entries
in the central telephone book.
■ Every user can read out the
charges.
■ Every user who has a workplace
PC can use the OpenCTI 50 to
make calls, manage calls and
messages, dial numbers from
both the central and personal
telephone books, and use the
busy display of the OpenCTI 50.
■ The multi-company variant is
not activated.
Internet Functions
Note: Settings for mail and ISP and
RAS access are only possible by acti-
vating the OpenCom 100 IP package
in the Web console’s Configurator in
the SYS Configuration: Licences
menu. Also refer to Information Re-
garding the Licensing of the IP Pack-
age for the OpenCom 100 on page 14.
■ RAS access (with or without call-
back) can be set up for every
OpenCom 100 user. RAS access
requires activation of the RAS
authorisation.
■ More than one mail account
query can be set up for every
user.
■ Every user with a system termi-
nal can be informed automati-
cally of the receipt of e-mails.
■ Users can disconnect existing In-
ternet connections (via the
OpenCom 100 Web console and
from a system terminal if the
function has been configured on
that terminal).
To Next Page
Loading...
