125
Frequently Asked Questions Internet
fined for the ISP (NET Configura-
tion: Connections: ISP menu). If
several routers are configured for
your network in different segments,
you can enter extra static routes in
the NET Configuration: Easy Access:
Routes menu.
Question: In our network the
OpenCom 100 dynamically issues
the IP addresses by DHCP. Can I
firmly assign the IP address for our
internal server PCs (mail, Web)?
You need a static address assign-
ment for these PCs. Make the appro-
priate assignment entries in the
Configurator (NET Configuration:
DHCP menu). Activate “Dynamic and
static address”. If you fix a name for
these IP addresses in the NET Con-
figuration: Easy Access: Hosts
menu, you can address the server
PCs quite easily by the DNS names.
Internet
Question: I cannot access our
company Web site.
Outside your system, your company
Web site is accessed at
“www.firm.com”, but in the Config-
urator you have entered “firm.com”
as the domain. Your company’s site
URL thus counts as an internal URL
and can only be accessed by enter-
ing the direct IP address. If required,
change the domain setting in the
NET Configuration: Easy Access
menu.
Question: Why do some Internet
services not work even though
they can be used when dialling in
directly via a modem?
Some Internet services require an
active connection coming from the
Internet. But the configured filter
rules prevent this. Plus, it is not pos-
sible to establish incoming Internet
connections with the PCs directly
owing to the network address trans-
lation process.
Question: It is not possible
to access the Internet with the
OpenPhone 25/27.
The requirement for this is that the
set should be configured as Hand-
set+data. The telephone number
used by the OpenPhone 25/27 to es-
tablish an Internet connection must
also be specified in the respective
user profile (Configurator, User
Manager: User menu).
With the OpenPhone 25/27, the In-
ternet can be accessed either di-
To Next Page
Loading...
