112
Overview Configuration Guide
Overview
Flowchart: Overview
Ye s
Finished
No
Ethernet network
(LAN) exists?
Connect the OpenCom 100 and the
configuration PC to the network
Connect the configuration PC to
the OpenCom 100 COM port.
Generate the Dialup Networking
entry with “occonfig”.
Configure OpenCom 100
Least Cost Routing function?
Configure OpenCom 100
network functions?
Ye s
No
Enter the licence code for releasing
the IP package in the “System
Configuration: Licences” menu.
Ye s
Dial in (RAS)?
Connection (LAN)?
Internet?
E-mail?
Ye s
Ye s
Ye s
Ye s
No
Create the user groups and users.
Set the system data. Select the access type. Connect
the S
0
, U
pn
and analogue devices and configure them.
Configure the call distribution scheme.
User Manager
PBX Configuration
Save data
E-Mail Configuration
ISP Configuration
LAN-LAN Configuration
RAS Configuration
Easy Access Configuration
LCR Configuration
Configure the Least Cost Routing
function: zones, network providers
and holidays.
No
No
No
No
Start the OpenCom 100 configuration
service via your Web browser.
Enter the OpenCom 100 address, for
example “http://192.168.99.254”.
Connect the configuration PC to
the OpenCom 100 LAN port.
Enable DHCP.
Cross-connected ethernet
cable available?
No
Ye s
To Next Page
Loading...
