DETEWE opencom 105 - Address Queries Using LDAP

108
Address Queries using LDAP Configuring the PC Software
service starts, the PC clock is
synchronised with the time of
the OpenCom 100.
Please note: In a Windows do-
main network, the PDC server (pri-
mary domain controller) should auto-
matically assume the function of the
timer.
SNTP with Windows XP
Here you configure the SNTP server
by double-clicking on the time in the
Start bar. Enter the OpenCom 100 as
the “server” in the “Internet time”
tab.
Address Queries using LDAP
You can search the data of the cen-
tral telephone book of the
OpenCom 100 from a workstation in
the LAN using LDAP (Lightweight Di-
rectory Access Protocol”). When con-
figuring an LDAP-enabled program,
specify the IP address of the
OpenCom 100 as the address of the
LDAP server.
LDAP with Outlook Express
You can configure and operate the
LDAP directory service with Outlook
Express
TM
, a Microsoft
TM
e-mail pro-
gram, as follows:
1. Call up the Accounts command
in the Tools menu.
The Internet Accounts dialogue
box will then open.
2. Click on Add. Select the Direc-
tory Service command from the
pop-up menu.
The Internet Connection Wiz-
ard dialogue box for Internet ac-
cess will then open.
3. Under Internet directory
(LDAP) server, enter the ad-
dress of the OpenCom 100. It is
not necessary to log in to the
LDAP server. Click twice on
Next. Then click on Finish.
4. Check the function. In the Edit
menu, call up the Find: People
command.
The Find: People dialogue box
will then open.
5. In the Look in list, select the en-
try with the OpenCom 100 ad-
dress. Enter a user in the Name
input field, Administrator for ex-
ample. Then click on Find now.