DEV 1953 - Application.porttable.portentry.pohasrfsense

User Manual DEV 1953
124  Copyright DEV Systemtechnik GmbH 2015-2017
5.9.4.3.9.4 .application.portTable.portEntry.poHasRfSense
OID: .1.3.6.1.4.1.21035.41.2.9.1.4.x
Syntax: INTEGER {yes (1), no (2)}
Access: read-only
Description: The indication whether RF level information is provided or not.
Note:
 "1" (yes) is returned for the input ports of sensing switch modules (and of
digital signal switch modules) and for the input port of ASI/SDI distribution
amplifier modules, otherwise "2" (no).
5.9.4.3.9.5 .application.portTable.portEntry.poRfSense
OID: .1.3.6.1.4.1.21035.41.2.9.1.5.x
Syntax: INTEGER32
Access: read-only
Description: The measured RF level in [dBm/10].
"9999" means not available or not present.
Example: "-129" ≡ -12.9 dBm (only for input ports of sensing switch modules)
5.9.4.3.9.6 .application.portTable.portEntry.poRfLimit
OID: .1.3.6.1.4.1.21035.41.2.9.1.6.x
Syntax: INTEGER32
Access: read-write
Description: The RF threshold level in [dBm/10].
"9999" means not available or not present.
Example: "-300" ≡ -30.0 dBm (only for input ports of sensing switch modules)
Note:
 The factory setting is stated in chapter 4.3.1.
5.9.4.3.9.7 .application.portTable.portEntry.poHasBias
OID: .1.3.6.1.4.1.21035.41.2.9.1.7.x
Syntax: INTEGER {yes (1), no (2)}
Access: read-only
Description: The indication whether bias (i.e. LNB power) is provided or not.
For this type of device, "2" (no) is returned for all ports.
5.9.4.3.9.8 .application.portTable.portEntry.poBiasOnOff
OID: .1.3.6.1.4.1.21035.41.2.9.1.8.x
Syntax: INTEGER {on (1), off (2)}
Access: read-write
Description: The LNB power (or bias) supply state can be read or set.
For this type of device, "0" is returned for all ports.
5.9.4.3.9.9 .application.portTable.portEntry.poBiasCurrent
OID: .1.3.6.1.4.1.21035.41.2.9.1.9.x
Syntax: INTEGER32
Access: read-only
Description: The measured current in [mA/10].
For this type of device, "9999" is returned for all ports.