DEV 1953 - User Manual DEV

User Manual DEV 1953
 Copyright DEV Systemtechnik GmbH 2015-2017 133
5.9.4.4.10.1 .surveillance.fanTable.fanEntry.fanIndex
OID: .1.3.6.1.4.1.21035.41.3.10.1.1.x
Syntax: INTEGER32 (1..16)
Access: not-accessible
Description: A unique value for each table entry ranging between "1" and the
number of entries (defined by .numberOfFans, chapter 5.9.4.4.9).
Not applicable for this type of device, since the .fanTable is not
available.
5.9.4.4.10.2 .surveillance.fanTable.fanEntry.fanStatus
OID: .1.3.6.1.4.1.21035.41.3.10.1.2.x
Syntax: INTEGER {ok (1), notok (2)}
Access: read-only
Description: The status of the related fan. Not applicable for this type of device,
since the .fanTable is not available.
5.9.4.4.11 .surveillance.internalDeviceStatus
OID: .1.3.6.1.4.1.21035.41.3.11.0
Syntax: INTEGER {ok (1), notok (2)}
Access: read-only
Description: The internal device status (e.g. temperature, communication),
possible values:
"1" ok: no internal device events are reported;
"2" not ok: an internal device event was detected.
5.9.4.4.12 .surveillance.externalDeviceStatus
OID: .1.3.6.1.4.1.21035.41.3.12.0
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The status of external devices, e.g. of an antenna controller.
Not applicable for this type of device, thus "3" (notapplicable) is
returned.
5.9.4.4.13 .surveillance.supportHardwareStatus
OID: .1.3.6.1.4.1.21035.41.3.13.0
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The status of supporting hardware. Not applicable for this type of
device, thus "3" (notapplicable) is returned.
5.9.4.4.14 .surveillance.errorDescription
OID: .1.3.6.1.4.1.21035.41.3.14.0
Syntax: OCTET STRING (SIZE(1..48))
Access: accessible-for-notify
Description: .errorDescription contains the latest event description string, which
is used for .trapAlarmText; please refer to chapter 5.9.4.1.1.