Need help?Do you have a question about the DEV 1951 and is the answer not in the manual?
Outlines critical safety measures to be observed during operation and repair.
Lists and describes the various electrical, optical, and distribution amplifier modules available.
Covers device panel, communication, autonomous switching, and TRAC option.
Covers mechanical integration, grounding, cable connections, and module installation.
Details the configuration of serial and Ethernet interfaces for device communication.
Defines Local, Remote, and Auto modes, and Individual/Simultaneous switching modes.
Guides on accessing and using the Web Interface for device control and configuration.
Provides access to various configuration settings including user, system, feature, and software service options.
Configures network settings, SNMP, and Communication Protocol Handler (CPH).
Configures recording intervals, Auto Mode assignments, Time Based Switching, TRAC, and Actions.
Selects functionalities for Auto Mode like Autonomous Switching, Time Based Switching, or TRAC.
Lists and describes commands for status query, alarm query, and system identification.
Lists and describes commands for reporting, alarms, device description, and version requests.
Introduces SNMP concepts like managers, agents, OIDs, and MIBs for network management.
Describes specific MIB objects, their OIDs, syntax, access, and descriptions.
Controls and reads the device's current operation mode (Local, Remote, or Auto).
Mask to enable or disable error reporting for different classes of errors.
Lists different types of software-detected events, including power, module, input, RF level, and digital signal events.
Explains the pinout for the Sub-D 9 female RS 232 serial connector.
Describes the RJ-45 connector pinout for the Ethernet interface.
Declares conformity with EU directives, specifically RoHS, for the product and its modules.
To Next Page
General