User Manual DEV 1951
118 Copyright DEV Systemtechnik GmbH 2004-2017
5.9.4.3.9.17 .application.portTable.portEntry.poSlot
OID: .1.3.6.1.4.1.21035.41.2.9.1.17.x
Syntax: OCTET STRING (SIZE(32))
Access: read-only
Description: The slot location of the module to which the port belongs to.
Examples: • "Switch1" the switch module to which the port belongs to is
located in the left slot labeled "Channel 1"
• "Amp2" the distribution amplifier module to which the port
belongs to is located in the slot labeled "Channel 2"
(here the "logical" switch module (chapter 5.9.4.3.9) is
assumed to be in the slot location "Switch1").
5.9.4.3.9.18 .application.portTable.portEntry.poRfSenseStatus
OID: .1.3.6.1.4.1.21035.41.2.9.1.18.x
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The status of the RF level monitoring (or the digital signal quality
status), possible values:
"1" ok: the RF level is above the RF threshold level
(or the digital signal quality is "OK")
"2" not ok: the RF level is below the RF threshold level
(or the digital signal quality is "Fail")
"3" not applicable: is returned for ports without RF level
(or digital signal quality) information
5.9.4.3.9.19 .application.portTable.portEntry.poBiasStatus
OID: .1.3.6.1.4.1.21035.41.2.9.1.19.x
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The status of the LNB (bias) current monitoring.
For this type of device, "3" (notapplicable) is returned for all ports.
5.9.4.3.9.20 .application.portTable.portEntry.poLightStatus
OID: .1.3.6.1.4.1.21035.41.2.9.1.20.x
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The light detection status.
For this type of device, "3" (notapplicable) is returned for all ports.
To Next Page
Loading...