User Manual DEV 1951
Copyright DEV Systemtechnik GmbH 2004-2017 119
5.9.4.3.9.21 .application.portTable.portEntry.poCardStatus
OID: .1.3.6.1.4.1.21035.41.2.9.1.21.x
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The health status for the module to which the port belongs to,
possible values:
"1" ok: no events are reported for the module
"2" not ok: an event was detected for the module, or the module
is a "logical" switch module (chapter 5.9.4.3.9)
"3" not applicable: this value is returned for switch modules
without any event detection
5.9.4.3.10 .application.antennaStatus
OID: .1.3.6.1.4.1.21035.41.2.10.0
Syntax: INTEGER {(0), moving (1), rfok (2), rfnok (3)}
Access: read-only
Description: The status of the motorized antenna.
For this type of device, "0" is returned.
5.9.4.3.11 .application.antennaPosition
OID: .1.3.6.1.4.1.21035.41.2.11.0
Syntax: INTEGER32
Access: read-only
Description: The position of the motorized antenna.
For this type of device, "0" is returned.
To Next Page
Loading...