DEV 1951 - Surveillance.fantable.fanentry.fanindex

User Manual DEV 1951
 Copyright DEV Systemtechnik GmbH 2004-2017 125
5.9.4.4.10.1 .surveillance.fanTable.fanEntry.fanIndex
OID: .1.3.6.1.4.1.21035.41.3.10.1.1.x
Syntax: INTEGER32 (1..16)
Access: not-accessible
Description: A unique value for each table entry ranging between "1" and the
number of entries (defined by .numberOfFans, please refer to
chapter 5.9.4.4.9). Not applicable for this type of device, since the
.fanTable is not available.
5.9.4.4.10.2 .surveillance.fanTable.fanEntry.fanStatus
OID: .1.3.6.1.4.1.21035.41.3.10.1.2.x
Syntax: INTEGER {ok (1), notok (2)}
Access: read-only
Description: The status of the related fan. Not applicable for this type of device,
since the .fanTable is not available.
5.9.4.4.11 .surveillance.internalDeviceStatus
OID: .1.3.6.1.4.1.21035.41.3.11.0
Syntax: INTEGER {ok (1), notok (2)}
Access: read-only
Description: The internal device status (e.g. temperature, communication),
possible values:
"1" ok: no internal device events are reported
"2" not ok: an internal device event was detected
5.9.4.4.12 .surveillance.externalDeviceStatus
OID: .1.3.6.1.4.1.21035.41.3.12.0
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The status of external devices, e.g. of an antenna controller.
For this type of device, "3" (notapplicable) is returned.
5.9.4.4.13 .surveillance.supportHardwareStatus
OID: .1.3.6.1.4.1.21035.41.3.13.0
Syntax: INTEGER {ok (1), notok (2), notapplicable (3)}
Access: read-only
Description: The status of supporting hardware.
For this type of device, "3" (notapplicable) is returned.
5.9.4.4.14 .surveillance.errorDescription
OID: .1.3.6.1.4.1.21035.41.3.14.0
Syntax: OCTET STRING (SIZE(1..48))
Access: accessible-for-notify
Description: .errorDescription contains the latest error description string, which
is used for .trapAlarmText; please refer to chapter 5.9.4.1.1.