DEV 1953 - Dev 14-0092

User Manual DEV 1953
22  Copyright DEV Systemtechnik GmbH 2015-2017
3.2.17 DEV 14-0092
Distribution Amplifier 1:3; ASI; 75 Ohm, BNC (f)
1
3
4
Out 1
Pos 0: without electrical p ower
Pos 1: with electrical power
(state show n here)
Out 2
In
Out 2
External
Controller
Logic
CD
1
0 0
1
2
Ou t 1
Ou t 2
Ou t 3
In
DE V 14-0092
The module is designed to distribute and to amplify ASI signals. Normally the input
signal is routed to the three separately amplified output ports. In the case of power
loss, the input signal is routed only to the first output port ("Out 1") and the other
output ports do not carry any signal.
3.2.18 DEV 14-0094
DPST Switch Module with DA 1:3; ASI / 3G-SDI; 75 Ohm, BNC (f)
In B
Out 3
Position 0: without electrical power
Position 1: with electrical power In A selected
Position 2: with electrical power In B selected
(state show n here)
1
2
4
5
Out 2
Out 1
1,2
02
0,1
0,1
0,1
2
2
0
1,2
External
Controller
Logic
C
D
D
C
In A
3
DE V 14-0094
In A
In B
Ou t 1
Ou t 2
Ou t 3
The functionality of the module DEV 14-0094 is identical with the module
DEV 14-0089 (please refer to chapter 3.2.15), but the module is designed for
SD-SDI, HD-SDI, and 3G-SDI signals in addition to ASI signals.
Note:
 Output port 1 ("Out 1") delivers an inverted ASI signal!