[Paper Margin] 7-13
" The card can only be placed on the original glass. Position the card to
be scanned aligned at the upper-left corner of the original glass. Since
the image is printed 4 mm from the top and left side, reposition the
card as necessary
1 In the home screen, press [Copy].
2 Press [ID Copy].
3 Place the card, front side down, on the original glass.
" For details on positioning the document, refer to “Placing a document
on the original glass” on page 4-36.
4 Press the [Start (Color)] key or the [Start (B&W)] key.
Scanning of the front side begins.
5 Position the card, back side down, at the same location on the original
glass.
" To copy only the front side, press [Print].
6 Press the [Start (Color)] key or the [Start (B&W)] key.
Scanning of the back side begins.
The copy is fed out.
[Paper Margin]
Copies can be printed with a binding margin so they can easily be stored in
filing binders.
" If part of the image is lost due to the binding margin setting, reduce the
zoom ratio before printing copies.
Item Description
[+]/[-] Specify the width of the binding margin between
0.1 mm and 20.0 mm (0.001 inches and 0.787
inches).
[None] Select this setting to leave no binding margin.
To Next Page
Loading...
