[Admin Settings] 3-47
[Memory Direct Print]
[Job Timeout]
[Copy Settings]
" All factory default values are shown in bold.
[Auto. Obtain Certifi-
cates]
Settings [Yes] / [No]
Select whether or not to automatically obtain
certificates.
[Print Digital Signature] Settings [Yes] / [No]
Select whether or not to print S/MIME informa-
tion.
Description
Settings [Enable] / [Disable]
Select whether or not to enable the Memory Direct function.
Description
Settings 5 to 300(Default:15)
Specify the length of time until a job timeout occurs.
Item Description
[Select Tray when APS
OFF]
Settings [Tray Before APS ON] / [Default
Tray]
Select which paper tray is selected when the
automatic tray-switching feature (APS) is dis-
abled.
[Paper Priority] Settings [Tray 1] / [Tray 2] / [Tray 3] / [Tray
4]
Specify the paper tray that is normally used.
" [Tray3] and [Tray4] do not appear if the
optional lower feeder units have not
been installed.
To Next Page
Loading...
