Transmitter Configuration Page
The Configuration page defines various transmitter functions.
General Settings
Language: Select an appropriate language for all text
Stick mode: Select one of Mode 1-4.
• Mode 1 is common in Europe. Elevator and Rudder on left, Throttle and Aileron
on right.
• Mode 2 is common in North America. Throttle and Rudder on left, Elevator and
Aileron on right.
• Mode 3 has Elevator and Aileron on left, Throttle and Rudder on right
• Mode 4 has Throttle and Aileron on left, Elevator and Rudder on right
Touch screen: Enter calibration or test mode
Sticks: Calibrate the range of all analog sticks and dials
Buzzer/LCD Settings
Battery alarm: Set battery voltage at
which alarm will sound
Alarm intvl: Set frequency of alarm
when battery is low.
Buzz volume: Set buzzer volume
Power-down alert: Play sound at
power-down
Backlight: Set screen brightness
Dimmer time: Set delay before
screen dims
Dimmer target: Set screen
brightness when dimmed
Page | 11
To Next Page
Loading...