Deviation Devo 6 - Servo Reverse (Standard GUI)

Switch assignment (See page 35)
Throttle-hold configuration (See page 36)
Fail-Safe configuration (See page 36)
Timer configuration (See page 28)
Telemetry configuration (See page 29)
Main page configuration (See page 13)
Servo Reverse (Standard GUI)
The servo reverse page allows quickly setting each channel to work in either normal or
reversed mode. These settings are equivalent to the ‘Reverse’ setting on the Channel
Configuration sub-page of the Mixer menu when using the Advanced Mixer (see page
21)
Page | 31