EasyManua.ls Logo

Dieci Apollo 25.6 - Battery Isolator Switch

Dieci Apollo 25.6
235 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance and Registering
D/36
Mod. Apollo
- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
BATTERY ISOLATOR SWITCH
(g.78/D Pos.”1”)
The battery isolator switch is located in the rear of the en-
gine compartment Its function is to cut off power to the elec-
trical system, opening the circuit on the negative pole.
- Turn the handle moving it to horizontal position to open
the circuit and disconnect electric power supply.
- Turn the handle moving it back to its original position
(g.78/D Pos.”1) to reset starting conditions and close
the circuit.
- ATTENTION -
The battery isolator switch must
be used only with the vehicle off.
- ATTENTION -
Use the battery isolator switch to open the electrical
circuit each time the vehicle is serviced.
(g.78/D)
1

Table of Contents

Related product manuals