PARKING THE VEHICLE
- Always park on at, even and level ground where there
is no risk of falling masses, landslides or ooding.
- Lower outriggers to the ground (if present)
- Retract the boom completely and lower it to the ground.
- Engage the parking brake
- Move the “direction” lever to position "N".
- Run the engine for a minimum of 60 seconds before
switching off in order to cool the engine down.
- Turn the key to the halt engine position.
- Remove the key from the ignition.
- Block the hydraulic controls using the devices provided
(when present).
- Close and lock windows using the specially provided
handles.
- Close and lock the cab door.
- Place wedges under the wheels.
- Make sure that the vehicle is parked so that it does not
block trafc and at least 5 metres away from railway tracks.
TEMPORARY HALT
Gradually release the accelerator pedal.
Bring the vehicle to a halt on at ground.
Engage the parking brake
Move the “direction” lever to position "N".
While the vehicle is being run-in (50 h) do not keep the
diesel engine at minimum revs for too long.
- ATTENTION -
IF THE OPERATOR MUST ABANDON THE DRIVER'S
SEAT, HE/SHE SHOULD FOLLOW THE INSTRUCTIONS
PROVIDED IN THE PARAGRAPH REGARDING "PAR-
KING THE VEHICLE".
To Next Page
Loading...
