B/44
Mod. Apollo
Safety Regulations
LOAD HANDLING
Picking a load up from the ground
1. Slowly approach the load to be lifted with the boom com-
pletely retracted and the forks horizontally positioned at
the height of the lifting position.
Keep forks raised just enough to avoid contact with the
ground.
2. Bring forks under load to be lifted until contact is made
with the fork holding plate. Engage the parking brake
and move the gear selector to neutral.
3. Slightly lift up the load and tilt the fork holding plate back-
wards, bringing it to the transport position.
- ATTENTION -
Always respect the load's centre of gravity, slant the
forks just enough to ensure stability and prevent
load loss during braking.
- ATTENTION -
Never transport a load with the boom
raised and/or extended
To Next Page
Loading...
