C/3
- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
EVERY MODIFICATION MADE TO THE VEHICLE LEADS TO A NEW
VERIFICATION OF CONFORMITY WITH THE 2006/42/EC MACHIN-
ERY DIRECTIVE THIS PROCEDURE IS ALSO VALID IN THE CASE
OF REPAIRS WITH NON-ORIGINAL SPARE PARTS.
IT IS PROHIBITED TO OPERATE IF THIS MANUAL HAS NOT BEEN READ AND
UNDERSTOOD.
THE OPERATOR IS REQUIRED TO LEARN THE LOCATION AND FUNCTION OF ALL
INSTRUMENTS AND CONTROLS, INDEPENDENT OF HIS OR HER EXPERIENCE IN
THE FIELD, BEFORE OPERATING THE VEHICLE.
THE IMAGES, DESCRIPTIONS, MEASUREMENTS STATED IN THIS CHAPTER
REFER TO STANDARD VEHICLES.
ALL FUNCTIONS AND PROCEDURES CONCERNING THE OPERATION AND
MOUNTING OF THE VEHICLE’S ATTACHMENTS THAT ARE NOT DESCRIBED IN
THIS MANUAL ARE STRICTLY FORBIDDEN.
USE OF THE VEHICLE DIFFERENT TO THAT DESCRIBED IN THIS MANUAL IS
PROHIBITED.
IT IS MANDATORY TO HAVE READ AND LEARNED CHAPTER “B“ (SAFETY
STANDARDS) BEFORE READING CHAPTER “C” AND USING THE VEHICLE.
To Next Page
Loading...
