Get started Verify product components
AnywhereUSB® Plus User Guide
15
Item Name Description
1 USB port
LEDs
The USB ports support 1.1, 2.0, and 3.1 USB devices.
The LED illuminates as follows, based on the speed of the USB device:
n 1.1 (Full speed): Yellow
n 2.0 (High speed): Green
n 3.1 (Super speed): Blue
2 ETH1
Connect a Cat 7 STP Ethernet cable.
Note Digi recommends that you use either the Ethernet cable or the
SFP+ module. If both the Ethernet cable and the SFP+ module are
connected, the SFP+ module will have priority.