About the module Module pinout
ConnectCore for i.MX51 Hardware Reference Manual
32
Pin Type Signal name Use on module
Use on
development
board
Comments
J2:58 GPIO27 CSI2_D13/GPIO4_
10
i.MX51: CSI2_D13 Camera 2
Data
J2:59 HSGPIO27 CSI2_D14 i.MX51: CSI2_D14 Camera 2
Data
J2:60 HSGPIO27 CSI2_D15 i.MX51: CSI2_D15 Camera 2
Data
J2:61 HSGPIO27 CSI2_D16 i.MX51: CSI2_D16 Camera 2
Data
J2:62 HSGPIO27 CSI2_D17 i.MX51: CSI2_D17 Camera 2
Data
J2:63 GPIO27 CSI2_D18/GPIO4_
11
i.MX51: CSI2_D18 Camera 2
Data
J2:64 GPIO27 CSI2_D19/GPIO4_
12
i.MX51: CSI2_D19 Camera 2
Data
J2:65 GPIO27 CSI2_
VSYNC/GPIO4_13
i.MX51: CSI2_
VSYNC
Camera 2
VSYNC
J2:66 GPIO27 CSI2_
HSYNC/GPIO4_14
i.MX51: CSI2_
HSYNC
Camera 2
HSYNC
J2:67 GPIO27 CSI2_PIXCLK_
GPIO4_15
i.MX51: CSI2_
PIXCLK
Camera 2
PIXCLK
J2:68 - GND -
J2:69 - GND -
J2:70 DIG_USB USB_OTG_ID i.MX51: ID USB OTG ID
J2:71 AN_USB USB_OTG_DP i.MX51: DP USB OTG DP
J2:72 - USB_OTG_VBUS i.MX51: VBUS USB OTG
VBUS
J2:73 AN_USB USB_OTG_DN i.MX51: DN USB OTG DN
J2:74 GPIO27 GPIO1_8/USB_
PWR
i.MX51: GPIO_8 Not used
J2:75 - GND - -
J2:76 GPIO27 GPIO1_
2/PWM1/I2C2_SCL
i.MX51: GPIO1_2
MMA7455LR1:SCL
I
2
C Bus Clock
To Next Page
Loading...
Need help?
General
