Need help?Do you have a question about the Digi EX15 and is the answer not in the manual?
General| Model | EX15 |
|---|---|
| Type | Extender |
| Ethernet Ports | 1 |
| Serial Ports | 1 |
| Data Bits | 8 |
| Stop Bits | 1 |
| Parity | None, Even, Odd, Mark, Space |
| Flow Control | None, XON/XOFF |
| Humidity | 5% to 95% (non-condensing) |
| Weight (oz) | 2.5 oz |
| Baud Rate | 300 bps to 115.2 kbps |
Details the items included in the product package.
Describes the physical components and ports of the device.
Explains the modem installation and identification.
Explains the meaning of the device's indicator lights.
Details the status of the LTE connection based on LED indicators.
Explains how signal strength is measured and displayed.
Procedure to determine the optimal cellular signal location.
Guidance for resolving issues when a strong cellular signal cannot be found.
Instructions for connecting the device to power and the network.
Explains how the device connects to cellular and wired networks.
Explains the device's capability for two internet connections.
How the device switches to a backup WAN connection.
Directing incoming network traffic to specific devices on the LAN.
Procedure to restore the device to factory default settings.
A flowchart to diagnose and resolve LTE connectivity issues.
Accessing the device console through aView's terminal interface.
Establishing a console connection via SSH to the device's LAN IP.
To Next Page
