Network managed configuration
Digi EX15 devices will automatically synchronize with the aView cloud management platform so long
as it is able to establish a network connection. This web-based configuration and monitoring portal
provides:
n Remote control and configuration updates
n Email notifications for user-defined parameters (connection quality, data usage, and so on).
n Out-of-Band SMS recovery
n Real-time monitoring for:
l Signal strength and quality
l Network connectivity details
l Location-based services
l Device performance
Changes made within aView will be applied to the intended recipient(s) as soon as those devices
check in with the web service for synchronization. This occurs once every 24 hours by default (though
it can be rescheduled as necessary).
Note This assumes the Digi EX15 device being configured has been registered with aView.
To apply all pending changes immediately, reboot the device or refer to the step-by-step guidance for
issuing remote commands.
Local configuration
If your Digi EX15 is not provisioned in aView, it will use a default local configuration profile.
Refer to Local device management to change settings for an Digi EX15-series without accessing
aView.
Note Changes applied locally will be overridden should the device then sync with its configuration
from aView.
Digi EX15 User Guide
31
To Next Page
Loading...
Need help?
General