Digi SM-5300 - Page 49

M o d e l S M - 5 3 0 0 U s e r M a n u a l | 48
Typical Operation
–––––––––––––––––––––––––––––––––––––––
2.3 Registration Mode
2. Digital Tare
This function can be used when tare weight is decided in advance. The knowing tare value
(weight of the tray) can be entering by numeric keys.
SPEC: SPEC 142B002 "Digital Tare" set "Yes" to enable this function.
OPERATION
DISPLAY
1.
In REGISTRATION MODE, enter Tare Value
by numeric key. (e.g. 200)
2.
Press [TARE] key to subtract the tare
weight.
3.
Press [TARE] key to clear the Tare value.
All manuals and user guides at all-guides.com