digico S21 - Dynamics 1 View

1-9
DiGiCo S21
1-9
1.3.6 Dynamics 1 View ....................................................................
Touching the Dynamics 1 area on either the Channel view or the Channel Setup will open the Dynamics 1 expanded view.
Dynamics 1 can be a Single Band or Multiband Compressor (on 4 channels). Touch the Mode button in the top bar to switch modes.
Multiband Dynamics has 4 viewing modes, one for each individual band and one that displays all 3 bands at the same time. These are
selected with the buttons on the left of the screen.
Parameters can be adjusted on-screen or using the Master Rotaries to the right of the screen.
The buttons in the top bar also provide the following functions:
Dynamics Module On/Off
Copy Dynamics settings to another channel(s) - touch the button and select the destination channels from the channel picker - OK to
conrm
Reset Dynamics module
Switch to EQ view
DYN 1 On/Off
Reset DYN 1
Copy DYN 1
Switch to Dyn 2 view
Adjust
Parameters
Master Rotary
Assignment
Select Mode
Switch to EQ view
Select band
MultiBand view
DYN 1 On/Off
Reset DYN 1
Copy DYN 1
Switch to Dyn 2 view
Adjust
Parameters
Master Rotary
Assignment
Select Mode
Switch to EQ view
Select band
MultiBand view
DYN 1 On/Off
Reset DYN 1
Copy DYN 1
Switch to Dyn 2 view
Adjust
Parameters
Master Rotary
Assignment
Select Mode