UTM-00339 | Rev 19
Page 21 of 253
DetNet South Africa Copyright © 2021
The DigiShot
®
Plus 4G Commander is a 4-channel multi-functional device intended for use across
all surface blasting applications in the DetNet portfolio. DetNet has designed the DigiShot
®
Plus
4G Commander to incorporate an internal antenna to communicate in RF. Corresponding with the
system’s ease-of-use the DigiShot
®
Plus 4G Commander has a simple user interface, which
comprises a screen and two buttons. Allowing for easy inventory control, especially in the way of
storing spare equipment, the DigiShot
®
Plus 4G Commander unit may be configured to function
either as:
• Base Commander,
• Bench Commander, or
• Repeater.
The CE4 Tagger is an inherently safe device that is used on the bench to test detonators and assign
delays to them. The CE4 Tagger has a dual role and may also be used to wirelessly connect to a
DigiShot
®
Plus 4G Commander thereby acting as an interface unit for the DigiShot
®
Plus 4G
Commander.
The DigiShot
®
Plus 4G Detonator is a programmable detonator that is suitable for all types
of blasting
operations, especially those requiring precise timing.
The DigiShot
®
Plus 4G Detonator is housed in a copper tube, which protects the circuit
board and the base
charge.
The DigiShot
®
Plus 4G Detonator is attached to a robust black and green two wire down-
line cable that is capped with a gel-filled connector that clips on a surface harness wire.
ELECTRONIC DETONATORS ARE TOTALLY DIFFERENT TO CONVENTIONAL ELECTRIC DETONATORS AND
ABSOLUTELY NO CONNECTION WITH CONVENTIONAL ELECTRIC DETONATORS OR ANY OTHER ELECTRONIC
DETONATORS IS POSSIBLE AS IT CAN LEAD TO UNINTENDED INITIATION. ALL USERS OPERATING THE
ELECTRONIC INITIATION SYSTEM SHALL HAVE SUCCESSFULLY COMPLETED THE SPECIFIC TRAINING BEFORE
PERFORMING ANY WORK WITH THE DEVICE(S). DO NOT USE ANY DEVICES OTHER THAN THOSE SPECIALLY
DESIGNED FOR THIS TYPE OF ELECTRONIC DETONATOR. NEVER CONNECT ANY THIRD PARTY OR OTHER
UNAPPROVED DETONATORS TO THE DIGISHOT
®
PLUS 4G COMMANDER SYSTEM