UTM-00339 | Rev 19
Page 203 of 253
DetNet South Africa Copyright © 2021
2. Prepare for Blast
• Press SoftKey to select Program Detonators.
3. Program Detonators
• Detonators will be programmed.
• Press or button to return to Prepare for Blast Menu.
4. Prepare for Blast
• Press to select Arm.
5. Arm
• Press to select Remote Blast.
ARM AND FIRE COMMANDS FOR DETONATORS WILL NOT INITIALLY BE KNOWN TO THE DIGISHOT
®
PLUS
4G COMMANDER AT POWER ON. THESE COMMANDS ARE ONLY AVAILABLE FROM THE BLASTING (RED)
BLASTCARD AND WILL BE ISSUED TO THE COMMANDER WHEN NECESSARY, EITHER DIRECTLY FROM THE
RED BLASTCARD (IN CASE OF A LOCAL BLAST) OR REMOTELY FROM THE BASE DIGISHOT
®
PLUS 4G
COMMANDER. ARM AND FIRE BLASTING COMMANDS WILL BE ERASED FROM THE COMMANDER MEMORY
AFTER USE.
To Next Page
Loading...