DigiShot plus.4G - Extra Info Bar

UTM-00339 | Rev 19
Page 44 of 253
DetNet South Africa Copyright © 2021
5.3. End of Row
5.4. Inflection Pt.
5.5. Remove Mark
6- Assign ViewShot - Available in
Planned (P) tagging option only
No detonators message is displayed if the detonator list (tagged) is
empty
7- ViewShot - Available in Planned
(P) tagging option only
7.1. Verify Plan
7.2. Verify Delays
7.3. Show Results
7.4. Merge Plan
7.5. Select ViewShot
7.6. Delete ViewShot
7.7. Reconciliation
Table 5: CE4 Tagger Configuration Menu Reference
.1: 4G Setup
.1.1. Tag Option
Select:
• Basic (B)
• Advanced (A)
• Planned (P)
.1.2. Site Setup
• Use Markers (B/A/P)
• Multi-Commander (A/B/P)
• Autotag (A/P)
• Multi Primed (A)
• Assign Locations (A)
• List Hole Config (A/ P)
• Det Label (A/ P)
.1.3. Leakage Trigger
• Select leakage warning trigger (Between 0.1 and 1mA)
.1.4. Test Single on Bus
• Disable
• Enable
1.5. Extra Info Bar
• Hide Info Bar
• Show Info Bar
.2: Device Setup
2.1. Contrast
2.2. Brightness
2.3. Time Zone