DigiShot plus.4G - Page 45

UTM-00339 | Rev 19
Page 45 of 253
DetNet South Africa Copyright © 2021
2.4. Timeouts
2.5. Language
2.6. Units
.3: Advanced Setup
3.1. Tagger ID
3.2. Connections
3.3. Remote View
3.4. Clear Tags
3.5. Device Password
3.6. Read All Det Data
3.7. Max Wire length
3.8. Reconciliation
.4: Factory Setup
4.1. Clear Tags
4.2. Clear Logs
4.3. Leakage Calibrate
4.4. Start Self-Test
4.5. Experimental Menu
4.6. Storage Mode
4.7. Connector Type
4.8. Reset Service Date
4.9. SD Card Dump
5. DGPS Setup
5.1. Requires DGPS Tagger hardware to be enabled. Refer to DGPS
UTM-00345
The Factory Setup Menu is password protected and not for normal use. It is required to
access the Factory Setup only.