UTM-00339 | Rev 19
Page 64 of 253
DetNet South Africa Copyright © 2021
Timeouts
This function enables the user to set a time period of inactivity before the CE4 Tagger will automatically power off
to conserve battery power. The user can set the idle time between 2 to 360 minutes.
1. Main Menu
• Press SoftKey to select Configuration Settings.
2. Configuration Settings Menu
• Press to select Device Setup.
3. Device Setup
• Press to select Timeouts.
4. Auto Shutdown
• Use navigational keys to navigate selection.
o Minimum of 2 minutes.
o Maximum of 360 minutes.
• Press SoftKey to save.
• Press SoftKey to return to Main Menu.
To Next Page