UTM-00339 | Rev 19
Page 70 of 253
DetNet South Africa Copyright © 2021
1. Main Menu
• Press SoftKey to select Configuration Settings.
2. Configuration Settings Menu
• Press to select Advanced Setup.
3. Advanced Setup Menu
• Press to select Connections.
4. Connections
• Press on the keypad to connect CE4 Tagger to PC via Wi-Fi.
5. PC via Wi-Fi
• CE4 Tagger will search for access point on PC
• CE4 Tagger will connect to the PC
• Follow on-screen prompts to connect to CE4 Tagger
Access point Wi-Fi
To establish Wi-Fi connectivity between the CE4 Tagger and a PC, the PC must be
equipped with the required Wi-Fi functionality and corresponding software.
To Next Page
Loading...