Setup procedure for ‘PPPoE’:
Choose PPPoE. (Point to Point Protocol over Ethernet) If your ISP uses a PPPoE
connection it will provide you with a username and password. This option is typically
used for DSL services. Below given screen will be displayed.
Here is the description of every setup item:
Please input user name assigned by your Internet service
provider here.
Please input the password assigned by your Internet service
provider here.
Re-enter the password in this field for confirmation.
When you finish with all settings, press ‘Next’; if you want to go back to previous
menu, click ‘Back’.
Setup procedure for ‘Dynamic IP’:
Select Dynamic IP to obtain IP Address information automatically from your ISP.
Usually Cable Modem and the router will automatically obtain an IP address from the
DHCP server.
To Next Page
Loading...
