52 Scale Link 2 Technical Manual D4204-EN
WMA2-2 (D.A.N. 7162) WM2 ADJUST 2
0=OFF. Use value less than WMA2-1 for quick weight response.
WMA2-3 (D.A.N. 7163) WM2 ADJUST 3
Enter the weight to activate quick weight response.
MOTION (D.A.N. 7164) MOTION
ON = motion arrow flashes for unstable weight.
MOT WT (D.A.N. 7165) MOTION WEIGHT
Enter weight used to detect Motion. 0=Standard Motion detection.
TAREAP (D.A.N. 7166) TARE AUTO PRINT
ON = tare will auto-print displayed weight.
SAVTAR (D.A.N. 7167) SAVE TARE
ON = Indicator will save tare weight to non-volatile memory.
WT COM (D.A.N. 7168) WEIGHT COMPENSATION
Enables weight compensation functionality for scale platform A
AD FLT (D.A.N. 7169) AD FFT FILTERING
Enables A/D FFT filtering for scale platform A
CAL100 (D.A.N. 7171) FRACTIONAL WEIGHT CALIBRATION
Enables use of fractional CAL numbers for scale platform A
GAIN (D.A.N. 7172) GAIN
Select gain setting to be used for scale platform. (.75mv/v, 1.5mv/v, 3mv/v)
SCALE PLATFORM C
SCALID (D.A.N. 7201) SCALE ID SETUP
Identity of scale location (Truck ID or Mixer Number).
W MTHD (D.A.N. 7203) WEIGH METHOD
Select weigh method 1-General, 2-Slow, 3-Fast, or 4-Lock - On (Stockweigh only)
LB-KG (D.A.N. 7204) DISPLAY UNIT
Display pounds - lb or kilograms – kg
COUNT (D.A.N. 7205) DISPLAY COUNT
Select display count size of weigh values.
To Next Page
Loading...
