5c) Utility - Pressing the <Utility> button will enter the utility mode where editing can be done.
5d) Previous Page - The <Previous Page> button moves to the previous page of the selected module that is being edited or to the
previous utility page when the RP-20 Valve is in Utility mode.
5e) Next Page - The <Next Page> button moves to the next page of the selected module that is being edited or to the next utility page
when the RP-20 Valve is in Utility mode.
5f) Assign - The <Assign> button is used for making any continuous controller assignments to footswitches. For more information about
assigning functions, please see page 63.
6) Data Wheel - The <Data> Wheel is used for scrolling through the programs of the RP-20 Valve and various editing functions
7) Expression Pedal - The Expression pedal is used for continuous control over any parameter of the RP-20 Valve. For more about
continuous control assignments of the RP-20 Valve, please see page 63.
RP-20 Valve
User Guide
Section -1 Introduction
5
To Next Page