DigiTech RP-20 VALVE - Effect Configuration Chart

Effect Configuration Chart
L/R OUTS
GATE
4
L/R OUTS
GATE
L/R OUTS
GATE
L/R OUTS
GATE
L/R OUTS
GATE
L/R OUTS
GATE
L/R OUTS
L/R OUTS
GATE
4
13
9
7
8
4
L/R OUTS
L/R OUTS
GATE
3
4
4
44
2
1
2
3
10
12
14
6
515
11
L/R OUTS
L/R OUTS
GATE
4
4
4
4
L/R OUTS
GATE
2
2
444
4
2
L/R OUTS
L/R OUTS
GATE
44
4
4
L/R OUTS
L/R OUTS
GATE
2
2
L/R OUTS
GATE
L/R OUTS
GATE
2
2
L/R OUTS
L/R OUTS
GATE
44
2
244
L/R OUTS
42 4
L/R OUTS
F
3
44
2
Key: 4= 1/4 size module
K 3= 3/4 size module
2= 1/2 size module
KF= Whole size module
Dual Output Comfigurations -Take notice that several effect configurations (ie: 12 and 14) use dual outputs. This indicates that Dual distortion
paths can be run to both the right and the left outputs. This will be dictated by panning either distortions to the right or the left.
Config:Series 4,4,4,4
Config:Series Full
Config:Stereo 4,4,4,4
Config:MonoSplit 2,2
Config:Stereo 2,2
Config:MonoSplit 4,4,4,4
Config:Stereo 4,4,2
Config:Series 3,4
Config:Series 4,3
Config:Parall 4,4,2
Config:Mono Split 4,4,2
Config:Series 4,4,2
Config:Series 2,4,4
Config:Series 4,2,4
Config:Series 2,2
Section - 6 Appendix
RP-20 Valve
User Guide
76