Editing a Program
The RP-20 Valve is capable of producing almost any guitar sound ever thought conceivable. Whether it be Preamp tone or an effect configura-
tion that utilizes the most sophisticated digital effects available. Great sounds aren’t just a crazy concept, but a very achievable possibility, and
in these next few pages, we will give you some pointers in editing programs, to help achieve your own unique tones.
Program Editing Sections
1. Preamp Section Editing
2. Digitally controlled Analog Wah Editing
3. Preamp Compressor
4. Noise Reduction Editing
5. Digital Effects Editing
Preamp Section Editing
From any program within the Preamp Section you can select and edit any preamp effect by performing the following procedures:
Editing Distortion Types
1. From program mode press the <Preamp> button once and the display will appear something like this:
2. Now continue to press the <Preamp > button until only the selected distortion type (Tube or Solid State) flashes in the display. Once
you are there, the display will appear something like this:
To Next Page
Loading...
