DigiTech RP-20 VALVE - Section 2 - Setting Up; Making Connections

Section-2 Setting Up
Making Connections
Your RP-20 Valve can be connected in several different ways to meet the requirements of specific applications. The following diagrams offer
some different ways your RP-20 Valve can be connected.
RP-20 Valve into a stereo power amp and two 2x12 Extension Speaker Cabinets
For those of you out there that feel that “bigger is better”, this set-up should work quite nicely for you. First plug into the input of the RP-20
Valve. RP-20 Valve run out of both of the outputs into the stereo inputs of the power amp. Using a set-up such as this will let you produce that
classic Stack Sound. This is also a great set-up to produce lush and thick stereo effects.
Input
Right Out
Right In
Left (Mono) Out
Left (Mono) In
Preset/Data
Stereo 100 Power Amp
Section - 2 Setting Up
RP-20 Valve
User Guide
10