From the Factory and in most situations, the SysEx channel is set at Channel 1.
Normal MIDI data, like Program Changes, MIDI Volume, Modulation, etc. is transmitted and received on the MIDI channel designated by the
setting of MIDI RECEIVE CHANNEL ). SysEx data, on the other hand, is transmitted and received on the SysEx channel designated by the
setting of SYSEX DEVICE CHANNEL.
This setup frees up your regular MIDI channels for other control options, and gives you the flexibility to request SysEx data from only the
devices you want in your setup, whether they share the same MIDI channel or not.
To change the SysEx Device Channel number do the following:
1. Press the <Utility> button, and scroll to Page 6 of the Utility menu by pressing either the <Next Page> or <Previous Page> buttons
until yo reach page 6. The display reads:
2. Press the <2> button and then turn the <Data> wheel to select the desired SysEx channel (1, 2,...15, 16).
Sysex Dumps
Program Dump: Allows you to dump individual RP-20 Valve programs to another RP-20 Valve or external MIDI devices like patch librarians,
computers, or sequencers for backup, storage, or organization. This option allows you to select the program to be dumped, and, when
dumping to another RP-20 Valve, the program location where you want the program dumped.
To initiate an individual patch dump from the RP-20 Valve, do the following:
1. Press the <Utility> button and scroll to Page 8 of the Utility menu by pressing either the <Next Page> or <Previous Page> buttons.
The display reads:
2. Press the function <3> button and then turn the <Data> , select the program number you want to dump. Note that the MIDI number
changes as you scroll.
3. Press the function <4> button and then turn the <Data> wheel to select the program location where you want the program dumped.
4. To initiate the dump, press the function <1> button and then turn the <Data> wheel. The Information line briefly reads:
To Next Page
Loading...
