DigiTech RP-20 VALVE - Comparing Changes

Comparing Changes
During the course of editing programs, you may find that you want to compare the edited version of the program to the original, stored
version. Fortunately, your RP-20 Valve provides you with a compare function.
To compare an edited program with the original stored version, do the following:
1. While in FX Edit mode, press the <Program> button twice. The top line of the display reads:
When this message is displayed, the original version of the program is temporarily loaded and active.
2. To return to the edited version, press either the <Preamp> and <Effects> buttons to get back to FX Edit Mode.
*Comparing Original Prg*
2
FACTORY USER
%kHz
msdB
1
CHANGEDLINK
%kHz
msdB
2
CHANGEDLINK
%kHz
msdB
LINK
%kHz
msdB
4
CHANGEDLINK
PAGE
1
OF 2
WAH
COMP
TUBE EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
BANK
Section - 3 Editing Programs
RP-20 Valve
User Guide
24