Sending Program Dump...
after which it returns to the program dump screen.
Default Dump: Allows you to dump individual RP-20 Valve User defaults to another RP-20 Valve or external MIDI devices like patch librarians,
computers, or sequencers for backup, storage, or organization. This option allows you to select the default to be dumped.
To initiate an individual Default dump from the RP-20 Valve, do the following:
1. Press the <Utility> button and scroll to Page 9 of the Utility menu by pressing either the <Next Page> or <Previous Page>buttons.
The display reads:
2. Press the function <2> button and the turn the <Data> wheel to select the Effect Module whose Default you want to dump.
3. Press the function <4> button and then turn the <Data> wheel to select the User Default you want to dump.
4. To initiate the dump, press the function <1> button and then turn the <Data> wheel. The Information line briefly reads:
Sending User Default...
after which it returns to the User default screen.
Bulk Dump: This option allows you to dump all resident Programs in memory to an external recording device, like a patch librarian,
computer, or sequencer for backup, storage, or organization. This option dumps all Programs simultaneously. It does not send any RP-20 Valve
system information, such as SysEx Device channel or Programs maps.
To perform a SysEx Bulk Dump of all RP-20 Valve Programs, do the following:
1. Press the <Utility> button and scroll to Page 7 of the Utility menu by pressing either the <Next Page> or <Previous Page>buttons
until you reach page 7. The display reads:
2. To initiate a bulk dump, press the <3> button and then turn the <Data> wheel. The Information line of the display reads:
SENDING BULK DUMP...
To Next Page
Loading...
