Press the any button to exit the Tuner mode.
Reference and Output
The RP-20 Valve gives you the option of changing the Tuning reference from as low as F# or A=427 to A=453, by simply pressing the <3>
button and then turning the <Data> wheel while the RP-20 Valve is in Tuner mode. Another feature available in the RP-20 Valve Tuner mode,
is the ability to set the amount of signal that is passed to the output while tuning. This has a range from 0 (mute) to 100%. The output can be
changed by pressing the <4> button and then turning the <Data>wheel to the desired level while the RP-20 Valve is in Tuner mode.
Section - 2 Setting Up
RP-20 Valve
User Guide
16
To Next Page
Loading...
