91
2-7-4 Wireless Access Control
This function will help you to prevent unauthorized users from connecting to
your wireless router; only those wireless devices who have the MAC address
you assigned here can gain access to your wireless router. You can use this
function with other security measures described in previous section, to create
a safer wireless environment.
Up to 20 MAC addresses can be assigned by using this function. Please click
‘Wireless’ menu on the left of web management interface, then click ‘Access
Control’, and the following message will be displayed on your web browser:
All allowed MAC addresses will be displayed in ‘MAC Address Filtering Table’
(1). Here are descriptions of every setup items:
Delete Selected (2): If you want to delete a specific MAC address entry,
check the ‘select’ box of the MAC address you want to
delete, then click ‘Delete Selected’ button. (You can
select more than one MAC addresses).
Delete All (3): If you want to delete all MAC addresses listed here,
please click ‘Delete All’ button.
Enable To enforce MAC address filtering,
Access Control (4): you have to check ‘Enable Wireless Access Control’.
When this item is unchecked, wireless router will not
enforce MAC address filtering of wireless clients.
1
23
4
To Next Page
Loading...
Need help?
General
