93
2-7-5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between
wireless network clients and this wireless router. You don’t have to select
encryption mode and input a long encryption passphrase every time when you
need to setup a wireless client, you only have to press a button on wireless
client and this wireless router, and the WPS will do the rest for you.
This wireless router supports two types of WPS: Push-Button Configuration
(PBC), and PIN code. If you want to use PBC, you have to push a specific
button on the wireless client to start WPS mode, and switch this wireless router
to WPS mode too. You can push Reset/WPS button of this wireless router, or
click ‘Start PBC’ button in the web configuration interface to do this; if you want
to use PIN code, you have to know the PIN code of wireless client and switch it
to WPS mode, then provide the PIN code of the wireless client you wish to
connect to this wireless router. The detailed instructions are listed follow:
Please click ‘Wireless’ menu on the left of web management interface, then
click ‘WPS’, and the following message will be displayed on your web browser:
1
To Next Page
Loading...
Need help?
General
