Digitus DN-7059-2 User Manual

49
2-5-4 Setup procedure for ‘PPTP’:
PPTP requires two kinds of setting: WAN interface setting (setup IP address)
and PPTP setting (PPTP user name and password). Here we start from WAN
interface setting:
Select the type of how you obtain IP address from your service provider here.
You can choose ‘Obtain an IP address automatically’ (equal to DHCP, please
refer to ‘Cable Modem’ section above), or ‘Use the following IP address’ (i.e.
static IP address)
WAN interface settings must be correctly set, or the Internet connection will fail
even those settings of PPTP settings are correct. Please contact your Internet
service provider if you don’t know what you should fill in these fields.
Now please go to PPTP settings section:
1
2
3
4
5
7
8
9
6

Digitus DN-7059-2 Specifications

General

Brand	Digitus
Model	DN-7059-2
Product Type	Wireless Access Point
Frequency Bands	2.4 GHz
Maximum Data Rate	300 Mbps
Ethernet Ports	1
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Wireless Standard	IEEE 802.11n
Security	WPA, WPA2
Operating Mode	AP, Repeater, Router
Antenna Type	2 x External
Power Supply	5V DC, 1A
Storage Temperature	-40°C to 70°C
Ports	1 x 10/100 Mbps Ethernet