Digitus DN-7059-2 User Manual

65
2-6-2 DHCP Server:
These settings are only available when ‘DHCP Server’ in ‘LAN IP’ section is
‘Enabled’, and here are descriptions of every setup items:
Lease Time (1): Please choose a lease time (the duration that every
computer can keep a specific IP address) of every IP
address assigned by this router from dropdown menu.
Start IP (2): Please input the start IP address of the IP range.
End IP (3): Please input the end IP address of the IP range.
Domain Name (4): If you wish, you can also optionally input the domain
name for your network. This is optional.
Recommended Value if you don’t know what to fill:
Lease Time: Two Weeks (or ‘Forever’, if you have less than 20 computers)
Start IP: 192.168.2.100
End IP: 192.168.2.200
Domain Name: (leave it blank)
NOTE:
1. The number of the last field (mentioned ‘d’ field) of ‘End IP’ must be
greater than ‘Start IP’, and can not the same with router’s IP address.
2. The former three fields of IP address of ‘Start IP’, ‘End IP’, and ‘IP
Address of ‘LAN IP’ section (mentioned ‘a’, ‘b’, and ‘c’ field) should be
the same.
3. These settings will affect wireless clients too.
1
3
4
2

Digitus DN-7059-2 Specifications

General

Brand	Digitus
Model	DN-7059-2
Product Type	Wireless Access Point
Frequency Bands	2.4 GHz
Maximum Data Rate	300 Mbps
Ethernet Ports	1
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Wireless Standard	IEEE 802.11n
Security	WPA, WPA2
Operating Mode	AP, Repeater, Router
Antenna Type	2 x External
Power Supply	5V DC, 1A
Storage Temperature	-40°C to 70°C
Ports	1 x 10/100 Mbps Ethernet