42
2-5 Setup Internet Connection (WAN Setup)
Internet connections setup can be done by using ‘Quick Setup’ menu
described in chapter 2-3. However, you can setup WAN connections up by
using WAN configuration menu. You can also set advanced functions like
DDNS (Dynamic DNS) here.
To start configuration, please follow the following instructions:
Please click ‘WAN’ menu on the left of web management interface, and the
following message will be displayed on your web browser:
Please select an Internet connection method depend on the type of connection
you’re using. You can either click the connection method on the left (1) or right
(2). If you select the connection method on the right, please click ‘More
Configuration’ button after a method is selected.
Dynamic IP - Please go to section 2-5-1
Static IP - Please go to section 2-5-2
PPPoE - Please go to section 2-5-3
PPTP - Please go to section 2-5-4
L2TP - Please go to section 2-5-5
Telstra Big Pond - Please go to section 2-5-6
DNS - Please go to section 2-5-7
DDNS - Please go to section 2-5-8
WISP - Please go to section 2-5-9
To Next Page
Loading...
Need help?
General
