112
3-2-6 ALG Settings
Application Layer Gateway (ALG) is a special function of this router. It includes
many preset routing rules for numerous applications which require special
support. With these supports, those applications which required special
support will be able to work with NAT architecture.
Please click ‘NAT’ menu on the left of web management interface, then click
‘ALG Settings’, and the following message will be displayed on your web
browser:
There are many applications listed here. Please check the box of the special
support for applications you need, and then click ‘Apply’ button and the
following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other
setup procedures, or click ‘Apply’ to reboot the router so the settings will take
effect (Please wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
To Next Page
Loading...
Need help?
General
