113
3-3 Firewall
Excepting NAT, this router also provides firewall function to block malicious
intruders from accessing your computers on local network. These functions
include inbound attack prevention, and block outbound traffics, like block URLs
which have pre-defined keywords.
Please follow the following instructions to enable or disable firewall function:
Please click ‘Firewall’ menu on the left of web management interface, and the
following message will be displayed on your web browser:
Please select ‘Enable’ or ‘Disable’ to enable or disable firewall function of this
router, the click ‘Apply’ button, and the following message will be displayed on
your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other
setup procedures, or click ‘Apply’ to reboot the router so the settings will take
effect (Please wait for about 30 seconds while router is rebooting).
To Next Page
Loading...
