77
Here are descriptions of every setup items:
Band (2): Select the band you want to use, all the wireless routers
must use the same setting.
SSID (3): Input the SSID of your wireless router, the setting
should be the same with other wireless routers for the
convenience of roaming.
Channel Select the channel you want to use, all the wireless
Number (4): routers must use the same setting.
Associated Clients(5): Click ‘Show Active Clients’ button, then an “Active
Wireless Client Table” will pop up. You can see the
status of all active wireless stations that are connecting
to the access point.
MAC address Input the MAC address of other wireless routers.
1 to 4 (6 - 9):
Security Click to set security settings for this connection
Setting (10): (Please go to section ‘2-7-3 Wireless Security’ for
detailed instructions).
To Next Page
Loading...
