DITEC LCA85 User Manual

21
IP2371EN
Setting of memory opening
via remote control
Setting of radio coded
messages
Compatibility setting with
older generation GOL4
remote controls
Maximum number of
remote controls that can
be stored in the integrated
memory
Menu navigation via remote
control keypad
Selection of function CH1 of
the stored remote control
Selection of function CH2 of
the stored remote control
Selection of function CH3 of
the stored remote control
Selection of function CH4 of
the stored remote control
Deletion of a remote control
Total memory deletion
Control panel firmware
version
Configuration storage
Configuration loading
Remote control
storage
Visualisation of number of
remote controls stored
Wireless operations
Special functions
Password setting
Password insertion
Deletion of user settings
Loading of last
configuration set
Alarm counter
Alarm log
Alarm reset
*
Display of min/max
temperatures recorded
Firmware update
Total number of
operations
Partial number of
operations
Power supply hours
Maintenance alarm
setting
Visualisation of
maintenance alarm mode
Reset of partial operations
counter
Energy-saving mode
Cycle counters
Energy management
Selection of device
connected to terminals
1-6 and 1-8
Display mode
Selection of device connected to
terminals 1-6
Selection of device
connected to terminal 6R
Selection of device connected to
terminals 1-8
Selection of device
connected to terminal 8R
Configuration of input 30-9
Advanced parameters
Switch-on time for
independently commanded
courtesy light
Switching from partial
opening with stop to fixed
partial opening ON/OF
Courtesy light switch-on
time
Duration of disengagement
after edge intervention
NIO intervention
temperature and
automatic ramps
Visualisation of internal
panel temperature
Automatic ramp
adjustment
Setting pre-flashing time
on opening
Adjustment of approach
speed during closing
Extra operating time after
limit switch activation
CLOSING
Extra operating time after
limit switch activation
OPENING
Renew automatic closing
time after safety device
release
Heavy Traffic function
Selection of operating
mode for device connected
to terminals 1-6
STOP operation mode from
push-button panel
Additional configurable
parameters viewable with
AT → AA enabled.
Selection of opening limit
switch mode
Selection of closure limit switch
mode
Mains power frequency
detected

DITEC LCA85 Specifications

General

Brand	DITEC
Model	LCA85
Category	Control Panel
Language	English